Antirust primer , Industrial primer , primer exporter , metal reformer

Rustgard is available in standard 5, 10, 20 Ltr. packing as a single or two coat product application:

RG 010 (First Application)

Remove all flaky, scaly, loose rust and old paint using a wire brush. Do not attempt at removing all the rust, as it is needed for the chemical reaction to take place.

Remove all grease, oil, salt or chemicals with high strength cleaner, Rinse.

Shake the container of Rustgard RG 010 vigorously to ensure proper mixing of sedimentation if any. Pour the desired quantity of Rustgard into a plastic container. Do not use a rusted metal container. Always keep the cap of RG 010 container tightly closed.

Apply first coat of RG 010 on the surface using a simple paint brush, roller or spray gun ensuring that the product is evenly spread on the surface. According to customers requirements, the viscosity of Rustgard can be adjusted to suit rollers or spray guns.

The colour of RG 010 will gradually turn from off white to brown / black within 20 minutes of application. It will be touch dry in one hour and will fully cure in 24 hours.

RG 010 will change colour from off white to black only when there is incidence of Rust. Where the surface is clean (No Rust) RG 010 will take on a transparency.

N.B : Most top-coats have been found to be compatible with RG-010, with the exception of Aluminum paint which needs a Red Oxide or similar primer in between. We advocate the use of primers and other top coats over RG as it should be part of the paint system, which in turn appreciably prolongs the life span of the paint system.